The K3Pro® EAK preform abutments are the material of choice for cement-retained crowns and bridges and are a functional, sustainable and economical solution, particularly in the molar region. A suitable abutment height (from 0.5 to 4.5 mm) and angulation of 10 and 15 degrees are available for each indication to determine the preparation margin. The abutment is pre-prepared with a circular step. A special highlight is the efficient and inexpensive option for direct impression taking using the precisely fitting snap-on cap of the classic closed impression with use of the EAK abutment analog for the plaster model. Ideally suited for the One-Abutment-One-Time philosophy with matching gingiva former caps in two diameters. Conical K3Pro® implant-abutment connection.

The K3Pro® AA Anatomic abutments are the most esthetic solution available for the fabrication of cemented dentures. The anatomical, garland-shaped shape of the abutment shoulder enables a particularly attractive design of the crown transition on the labial surface and a secure oral displacement of the cement gap. 4 gingival heights from 0.5 to 4.5 millimetres and 3 angulations from 10 to 30 degrees enable esthetic results even for the most difficult indications. Due to its length, the abutment is also very suitable for manual post-preparation. Conical K3Pro® implant-abutment connection.

The K3Pro® FF FreeForm abutment is the classic abutment for manual individual milling made of solid, monolithic titanium. Particularly suitable for telescopic restorations, as the abutment can be ideally milled at 0 degrees or 1 degree. An alternative for cases where an individual abutment is required that is to be prepared like a tooth stump. Available for all platforms in 3 diameters (5.0 and 6.0 mm for the 2 mm platform, 6.0 and 8.0 mm for the 3 mm and short platform) and in 2 step heights 0.5 and 1.5 mm. Conical K3Pro® implant-abutment connection.