The K3Pro® KSA Scan Abutment is the excellent choice for the fabrication of an occlusal screw-retained crown using the digital or manual milling technique. Its compatibility with digital design software for modeling zirconia crown and/or emergence profile or hybrid abutments for cement-retained bridges is outstanding. The scanning procedure is possible intraorally or on a laboratory scanner. Scan caps are available directly over the abutment (particularly low, scanning even with a closed bite) or separate universal scanbodies. A POM modeling cap is available for the manual procedure. The abutment is also ideal for press ceramics. Rotation lock with cam. Available in 3 total heights from 0.5 to 2.5 millimeters. In addition to the straight abutments, variants with 10 or 20 degree angulation are also available. With the conical K3Pro implant abutment connection.

The CS Cerec® compatible abutment is suitable for fabricating an occlusal screw-retained crown or an emergence abutment based on the K3Pro® using the special Cerec procedure from Dentsply-Sirona. Scan caps directly over the selected abutment or separate Cerec® compatible scan bodies are available for intraoral scan impressions using the Cerec® compatible Omnicam or Bluecam. The connection of the abutment is pre-assembled with its special cam for holding the Cerec blank. Processing instructions are available from us on request. Two overall heights available for both platforms. Conical implant-abutment connection.

The CAD abutments are the basis for the digital individual milling of titanium abutments for the K3Pro® implant, available for both inner diameters and in 2 gingival heights. The "Industry" connection type is used for large industrial milling machines (manufactured by Willemin-Macodel or Röder), the "Cone" connection for laboratory milling machines (Zirkonzahn) and the "Uni" connection is used together with a holding frame in semi-industrial milling machines from Imes Icore or MB Maschinenbau. With conical implant-abutment connection.

The K3Pro® FB FlexibleBase abutment is a titanium bonding base with gold-colored titanium nitrite coating for special requirements in terms of crown length and aesthetics and is therefore an excellent alternative. As a special feature among the adhesive bases, the abutment can be individually shortened or beveled. Particularly suitable for long crowns with an emergence profile in periodontally damaged teeth or for individualized gingiva formers for subcrestal insertion. Either digital or manual design is possible with a universal scanbody or classic modeling coping. Available in three total heights of 0.5, 1.0 and 1.5 millimeters. Classic K3Pro® tapered connection to the implant.

The Clou Base is the abutment of choice for unusual indications that are to be restored with an occlusally screw-retained zirconia emergence profile and supragingivally cemented crown. The design of the abutment allows the creation of an emergence profile with a beveled insertion direction of up to 40 degrees in relation to the implant axis. It is also suitable for indications in which the implant is placed outside the row of teeth due to difficult bone availability. The retentive bonding surface is always fully retained. Aesthetic titanium-nitrite coating. Two overall heights for both platforms. 2 or 3 different abutment pin widths available. Scan posts for digital design or modeling coping for press ceramics. Classic K3Pro® tapered connection to the implant.