Slider

_________________

Implants is our Business

_________________

Slider
  • The K3Pro® implant system developed by us captivates with its broad product portfolio with optimally coordinated system components. K3Pro® offers outstanding product properties with excellent clinical and esthetic results. The best connection between implant and abutment is ensured in the K3Pro® implants by the proven 1.5° taper. K3Pro® occupies a top position among the conical connections in the implant market. The connection with K3Pro® is so precise that even with implants with a diameter of 3 mm or more, optimal occlusion distribution, as with a one-piece implant, is guaranteed within the system.
    Read More
  • Although less well known in the public as organ transplantation, human donor tissue treatments are helping more than 1 million people a year in Europe. Doctors use donated tissue from the human musculoskeletal system to replace bones, tendons, and ligaments that have been damaged by tumors, accidents, joint disease, or other causes. In cooperation with the German Institute for Cell and Tissue Replacement, we have developed a program especially for the dental market, which makes it possible to effectively and safely treat even large bone defects.
    Read More
  • Test - passed!

    The cornerstones of product development are the laboratory test results obtained on specially designed in-house dental implant testing machines. With a test capacity of more than 4,000 weekly test hours, the laboratory is one of the leading players in this field.
  • Our Development

    From the first drawing to handmade samples or individual pieces, our employees develop new implants, special solutions and new materials. Minimal invasive with Osteograph. The Osteograph which is developed and manufactured by us is a precision pantograph for the production of three-dimensional grafts. The Osteograph enables to dispense with time-consuming adjustments and modeling of allografts ("self-milling"). At the same time, the risk of inaccurate fit is minimized. In this minimally invasive procedure, the block is first manufactured, after which the procedure is performed on the patient.
  • We create knowledge

    In order to ensure the medical training and education of physicians and surgeons, a special training center was opened in 2015 in our headquarters in Germany. This state-of-the-art and technically sophisticated equipped place accommodates groups of up to 30 participants. The training offer includes material and specialized training as well as surgical training with live surgery.
  • Our product range includes dental implants with the conical connection technology, bone graft substitutes, surgical instruments, special pantographs and services in 3D printing and milling technology, as well as fatigue testing machines for implants. Our corporate goal is to inspire you as a customer through an innovative, broad and affordable range of products and services. We develop, inspect, treat, clean and package all components ourselves, so we can assure you of the highest standard.
    Read More

History

  • 2001

    Since the company was founded, the Pressfit implants have enriched the expanding market of technically sophisticated implants. Our basic principle from the beginning: the revolutionary cone angle of 1.5 degrees, our innovation in mechanical engineering, which equates to cold welding. The secret lies in the particularly long and uniform cone, which ensures not only absolute form closure but also traction. The convincing result: bacteria-proof, micro-motion-free and titanium-abrasion-resistant due to the interference fit, which basically requires no screwing. For this an implant-abutment-force distribution as in a one-piece implant. We have remained true to this philosophy in principle until today. As former special feature was: The Pressfit implants were only tapped, not screwed. This involved both the insertion into the cavity and the abutment-implant connection.

     

  • 2003

    The Compress implants as the first consistent development of our system replaced the tapping by screwing. The insertion becomes more gentle and pleasant for the patient. Above all, Compress but was a relief for the prosthodontist, since the structure is now screwed on the inner joint for easier handling and an external hexagon allows indexing. The tried-and-tested 1.5-degree conical connection was noted, as it ensures to this day that cold welding does not place any load on the connection screw.

  • 2005

    The Konus Plus+ Implant System is designed to replace missing teeth without a central screw in a truly elegant way. The Konus Plus+ implant system allowed easy entry into the implantation or the change to this system under the following aspects: The Konus Plus+ implant system required no conversion and no increased effort in the treatment process. With its two components, it made dental implantology a simple, predictable and above all familiar treatment. Due to the lack of central screws, the crown abutments corresponded to a core structure and could be easily supplied with normal impression techniques and crowns (without additional expensive components). The casting technique corresponded to the normal crown supply, as well as the cementing. The prothetic solution for Konus Plus+ abutments required less chair time than for natural teeth.

     

  • 2007

    K3Pro® implant with compression thread design. The implant drill determines the direction of the implant. The parallel thread and the slightly conical implant body offer an increased surface area compared to conventional implants. Sure implants are suitable for all indications and provide ideal primary stability in all bone densities from D1 to D4. The sloping shoulder and the subcrestal insert allow a tight bone seal and a low exit profile from the sulcus. Thus, the bone and papillae is secured in the long run.

     

  • 2007

    Although less well-known as organ transplants, human donor tissue treatments help more than 1 million people a year in Europe. Doctors use donated tissue from the human musculoskeletal system to replace bones, tendons, and ligaments that have been damaged by tumors, accidents, joint disease, or other causes. In order to make these grafts accessible on the basis of legal and ethical bases as well as in compliance with the strictest quality and safety requirements, also to users in the oral, maxillofacial and facial area in Germany, Argon cooperates with the non-profit German Institute for Cell and Tissue Replacement (DIZG ) in Berlin, a foundation of doctors and scientists of the Universities of Berlin and Erlangen.

  • 2009

    K3Pro® implant with self-tapping thread design and conical implant body. The implant can still be steered directionally after drilling. The cutting thread and the cutting groove allow a controlled placement of the implant. Rapid implants are suitable for all indications and offer ideal primary stability; especially in the upper jaw. The implant is ideal for RapidFix solutions, with implants to be directionally controlled. The sloping shoulder and the subcrestal insert enable a tight bone seal and a low exit profile from the sulcus. Thus, the bone and papillae is secured in the long run.

     

  • 2013

    The same applies to the new short implants in lengths of 5.5 and 6.5 mm (with diameters starting at 4 mm), which can be blocked or used as a single tooth replacement. Thanks to the new compressive and tensile load, they effectively support the reconstruction and long-term preservation of the bone. With its solutions not only for standard cases but for the most unusual indications, K3Pro® offers a complete spectrum for sophisticated implantology.

  • 2014

    Argon now offers the Dental Surgeon Implantology a fully guided drilling system designed for 3.0-6.0 mm diameter implants. With this drilling system, the future placement of implants in terms of location, depth and angle is absolutely accurate and low in risk. The drilling system is based on a previously performed on the patient's jaw DVT radiograph. The resulting DICOM data record is processed by means of manufacturer-specific software in conjunction with the K3Pro® data records in such a way that an exact drilling template is created for placing the implants. The supplied protocol is equipped with technical data, application notes and implant type designations - practically an exact blueprint for the doctor and user being treated. This combination of digitized DVT data, processing by the proprietary software and the compatible data sets of K3Pro® make the placement of K3Pro® implants a predictable and highly precise process that allows immediate loading of the implants and a direct supply of the previously manufactured abutments and prostheses allows.

  • 2014

    In our DVT (Cone beam) center, we offer a state-of-the-art, three-dimensional X-ray method - digital volume tomography. This method allows a three-dimensional view of the facial structures. Consequently, a precise planning of the future prosthetic restoration is possible for the intended treatment. The DVT (Cone beam) recording is e.g. needed for computer-assisted insertion of dental implants. The procedure ensures a gentler, safer and more precise surgical procedure and a significant time savings. The depiction of the teeth as well as the maxillary and sinus cavities can be realized in a hitherto unknown resolution and expands the diagnostic possibilities.

  • 2015

    The Osteograph is a precision pantograph for making three-dimensional grafts. The Osteograph unit makes it possible to dispense with time-consuming adjustments and modeling of allografts ("self-milling"). At the same time, the risk of inaccurate fit is minimized. In this minimally invasive procedure, the block is first manufactured, after which the procedure is performed on the patient.

     

  • 2015

    My Ti-Base löst die täglichen Probleme ab jetzt dort, wo andere Abutments auf ihre Grenzen stoßen. Der „Clou“ daran ist eine hochästhetische variable Abwinkelung des Hybridabutments aus dem tiefsten Punkt der Gingiva. Zusätzlich bietet My Ti-Base Klebebasen mit Weitwinkel für alle gängigen Implantatsysteme aus einem neuen Blickwinkel – sowohl aus ästhetischer als auch aus mechanischer Sicht. My Ti-Base ist eine Systemfamilie mit höchst innovativen Mitgliedern für die unterschiedlichsten Abutmentlösungen.

     

  • 2015

    In order to ensure medical training and education for physicians and surgeons from all over the world, an own training center was opened in 2015 in Bingen. These state-of-the-art and technically sophisticated rooms can accommodate groups of up to 30 participants. The training measures are based on close cooperation with leading universities. Through existing cooperation with the University of Frankfurt, University of Witten, University of Bonn and the University of Cologne well-known professors as lecturers lead the training in the training center. With university lecturers, the high standards of medical education are met. The training offer includes material and specialized training as well as surgical training with live surgery. The live OPs that take place parallel to the training take place in the adjoining rooms of the user training. The surgical procedures on the patient are transferred to the training room via video and expertly accompanied and explained by the lecturers.

     

  • 2015

    In 2015, the company Implant Solutions GmbH & Co. KG was founded. With this range of services, the missing module has been added to be able to offer the digital workflow in its complete bandwidth at one location. Implant Solutions is a cooperation partner for dental laboratories, dentists, orthodontists and maxillofacial surgeons who want to use implant planning, 3D printing and milling services with the quality promise "Made in Germany".

     

  • 2016

    The X-ray products of the Group subsidiary Ray were successfully launched in 2014 in the German-speaking region. Now comes the new DVT-OPG Combo Alpha Plus. While the RAYSCAN Alpha impresses key implantology practices with its brilliant medium- to large-volume DVT recordings, the Alpha Plus continues: Starting from the maximum volume of 12 x 10 cm, freely scalable, smaller FOVs of up to 3 x 4 cm are possible , And this with optimized positioning thanks to a Guiding Light and in resolutions of up to 70 m. These are the best possible conditions, not only for implantological diagnostics, but also for parodontodontology. For orthodontics, the optional FRS equipment with one-shot or CdTe technology is an essential component. As a manufacturer of the K3Pro® implant system, Argon attaches great importance to data compatibility for the digital workflow in navigated implantology. Samsung RAYSCAN delivers this in optimum quality.

  • 2019

    Launch IDS

News

In our Implant Solutions milling and planning center, we offer surgical and prosthetic planning as well as 3D printing for models and surgical guides. To perform the work at Implant Solutions, a digital image of the patient's jaw in the DVT center is necessary. On the basis of these data, the production takes place a three-dimensional drilling template. This template, with an accuracy of about 0.1 mm, contributes to a significant improvement in prosthetics and surgery. Furthermore, Implant Solutions mills individual abutments made of zirconium dioxide or titanium, not only for K3Pro® implants, but also for many others Implant systems.

Contact

Argon Medical Productions & Vertriebs
Gesellschaft mbh & Co. KG
 
Franz-Kirsten-Straße 1
55411 Bingen am Rhein
 
Tel. + 49 (0) 6721 / 3096-0
Fax +49 (0) 6721 / 3096-29
 

Next Events

There are no up-coming events